LAUNCH CNC 602A Injector Cleaner

Fuel Injector has become very critical part of modern cars since it also control efficiency and average of the modern cars. It is very necessary to remove carbon deposited on injector since fuel imported in Indian market are of lower quality. 

To overcome this problem LAUNCH has designed special injector cleaner CNC-602A keeping in mind fuel quality in India. CNC-602A is an advance injector cleaner, which can clean and even test petrol car engine injectors by ultrasonic cleaning. Most advanced and path breaking innovation from LAUNCH for automotive expert. 

LAUNCH CNC 602A injector cleaner is designed keeping in mind car running on Indian road LAUNCH CNC 602A can support Maruti, Hyundai, Tata, Toyota, Nissan, Mitsubishi,Honda, VW, Skoda, Renault, BENZ, BMW, Jaguar, LandRover, Porsche, Volvo, AUDI, Fiat, OPEL, Fiat and many more brand running on Indian road.

Feature of LAUNCH CNC 602A:

• Ultrasonic cleaning: A most advance method to clean injector in most efficient way. This process removes carbon deposit from injector in most efficient way.
• Uniformity/Sprayability test:This test is used to test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the lighting of backlight.
• Leakage test: this test is used to test the sealing and dribbling conditions of injectors under system pressure with help of in built digital fuel pressure control.
• Injecting flow test: It is a test to check the injected amount of the injector in 15 seconds of constant injection, from this result technician can know about clogging or wear of Injector.
• Auto test: To test injectors by simulating different working conditions.
• N-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
• CNC 602A is also supported with fuel drain system by which just pressing one button drain all cleaning fluid.
• Reverse flush test: LAUNCH CNC 602A can also do reverse flush test where technician can clean injector by flushing liquid from outlet of injector to the inlet of the injector. 

LAUNCH CNC 602A Specification:

• Device Weight: About 35kg
• Fuel tank capacity: 4700ml
• Dimensions: 385mm×410mm×500mm
• Power supply: AC220V
• Input power: 250W
• Ultrasonic device power: 100W
• Simulated RPM range: 20 to 9880rpm
• Time range: 1 to 9988 Second
• Generated Pulse width: 0.5 to 25ms